Robvon Backing Rings

Robvon Commercial Backing Rings are designed for quick, easy alignment of pipe, tube, fittings and valves and assure precise, close tolerance fit-up. They allow complete penetration and fusion of the weld and radiograph perfect certified welds.

The patented nubs automatically set the weld gap for the root-pass. The internal bevels and flat inner lands assure non-restricted fluid flow. The Robvon backing ring eliminates the necessity of tack welding and it also eliminates slag, icicles or metal inside the bore which create obstructions, which and can cause damage to valve seats and strainers when broken loose.



Request a Backing Ring Quote

Backing Ring Styles

Robvon "CCC" Backing Ring Robvon "CCC" Backing Ring
Designed for quick easy joint alignment where the variation in inside diameters is relatively great.
   
Robvon "CC" Backing Ring Robvon "CC" Backing Ring
Designed primarily for automatic welding and to allow quick and easy joint alignment where the inside diameters are slightly out-of-round. Nubs can be chipped off or left intact to be melted into first root pass.
   
Robvon "Plain" Backing Ring Robvon "Plain" Backing Ring
Designed for quick and easy joint alignment, and for manually setting the root gap.


Backing Ring Welding Procedure

To see the Backing Ring Welding Procedure



Material's Available:

Carbon Steel ASTM A-109 ASTM A414/ASME SA-414
Chrome Moly ASTM A-182/ASME SA-182 F-11, F-22
Stainless Steel ASTM A-240/ASME SA-240 304, 304L, 316,
316L, 321, 347 & Others
Aluminum ASTM B-221/ASME SB-221 3003, 5086 & 6061
Copper Nickel MIL-C-15726(F) CDA-706, CDA-715

**Other weldable materials available upon inquiry; e.g., special grades of Chrome Moly, Stainless Steel, Nickel, and Cupro Nickel and Other's.


Backing Ring Ordering Information, Specify:

Quantity

NPS & Schedule or Tubing O.D. & Wall

Backing Ring type - "CCC", "CC" or Plain

Material & Grade

Example: ( 50 pcs - 6" std Robvon "CCC" Carbon Steel A-109)

Nominal Pipe Size or Tube OD range from 1" to 36 "
38" and larger are available upon request.

Note: All rings are marked on inside diameter with:
Size, Sch, Heat No., Material Grade & Robvon Company Identifier


General Backing Ring Information

Backing Rings are manufactured with the following ring gaps included, but are not limited to, 3/32" or .030" on sizes 4" and smaller; 5" and larger exhibit a 1/8" or .040" gap.

To view a table showing Robvon's Standard Backing Ring;
Dimensions, Ring Weights & Spacer Pins

"CCC" Spacer Nub lengths include, but are not limited to, 3/4" long on "CCC" ring types with 1/8" and 3/16" diameters; 1/8" and 3/16" diameter ball-type nubs on "CC" ring types.