 |
Tube to be fitted to.. |
 |
Insert the Squing into the inline tube. The spilt in the ring should be aligned with the weld seam in the tube
if there is one. Or you may need to grind the weld seam flush with the inside of the tube to assure a proper fit. |
 |
Fit the next piece of tube. Tack or clamp the tubes together. |
 |
When laying in the root pass welding away from the split in the ring, as you approach each spacer pin stop and strike the
spacer pin off the ring and then continue until the root pass is completed. |
 |
Then cap as required to finish the joint. |