| ASTM A109 Carbon Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Grade | C | Mn | Ph | S | ||||||
| T1,T2,T3 | 0.25 | 0.60 | 0.035 | 0.20 | ||||||
| T4, T5 | 0.15 | 0.60 | 0.035 | 0.20 | ||||||
| all listed elements are maximum unless specified | ||||||||||
| ASTM A-414 / ASME SA-414 Carbon Steel | ||||||||||
| Grade | C | Mn | Ph | S | ||||||
| A | 0.150 | 0.900 | 0.035 | 0.040 | ||||||
| B | 0.220 | 0.900 | 0.035 | 0.040 | ||||||
| C | 0.250 | 0.900 | 0.035 | 0.040 | ||||||
| D | 0.250 | 1.200 | 0.035 | 0.040 | ||||||
| E | 0.270 | 1.200 | 0.035 | 0.040 | ||||||
| F | 0.310 | 1.200 | 0.035 | 0.040 | ||||||
| G | 0.310 | 1.200 | 0.035 | 0.040 | ||||||
| all listed elements are maximum unless specified | ||||||||||
| ASME SA-182/ASTM A-182 Alloy Steel | ||||||||||
| Grade | C | Mn | Ph | S | Si | Cr | Mo | |||
| F-11 | 0.10- 0.20 |
0.30- 0.80 |
0.04 | 0.04 | 0.50- 1.00 |
1.00- 1.60 |
0.44- 0.65 |
|||
| F-22 | 0.15 | 0.30- 0.60 |
0.04 | 0.04 | 0.50 | 2.00- 2.50 |
0.87- 1.13 |
|||
| all listed elements are maximum unless specified | ||||||||||
| ASME SA-240/ASTM A240 Stainless Steel | ||||||||||
| Grade | C | Mn | Ph | S | Si | Cr | Ni | Other | ||
| 304 | 0.080 | 2.000 | 0.045 | 0.030 | 0.750 | 18.00- 20.00 |
8.00- 12.00 |
N 0.10 Max. | ||
| 304L | .030 | 2.000 | 0.045 | 0.030 | 0.750 | 18.00- 20.00 |
8.00- 12.00 |
N 0.10 Max. | ||
| 316 | 0.080 | 2.000 | 0.045 | 0.030 | 0.750 | 16.00- 18.00 |
10.00- 14.00 |
Mo 2.00- 3.00 N 0.010 Max. |
||
| 316L | 0.030 | 2.000 | 0.045 | 0.030 | 0.750 | 16.00- 18.00 |
10.00- 14.00 |
Mo 2.00- 3.00 N 0.10 Max. |
||
| 321 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 17.00- 19.00 |
9.00- 12.00 |
Ti 5 x (C+N) min, 0.70 Max. N 0.10 Max. | ||
| 347 | 0.08 | 2.00 | 0.045 | 0.030 | 0.75 | 17.00- 19.00 |
9.00- 13.00 |
Cb + Ta 10 x C min; 1.00 Max. | ||
| all listed elements are maximum unless specified | ||||||||||
| ASTM B-221 / ASME SB-221 | ||||||||||
| Grade | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other Elements | Al |
| 3003 | 0.60 | 0.70 | 0.05- 0.20 |
1.00- 1.50 |
0.10 | Each 0.05 Total 0.15 |
Rem. | |||
| 5086 | 0.40 | 0.50 | 0.10 | 0.20- 0.70 |
3.5- 4.5 |
0.05- 0.25 |
0.25 | 0.15 | Each 0.05 Total 0.15 |
Rem. |
| 6061 | 0.40- 0.80 |
0.7 | 0.15- 0.40 |
0.15 | 0.8- 1.2 |
0.04- 0.35 |
0.25 | 0.15 | Each 0.05 Total 0.15 |
Rem. |
| all listed elements are maximum unless specified | ||||||||||
| MIL-I-15726(F) | ||||||||||
| Grade | Cu | Ni | Zn | Fe | Lb | Mn | Ph | S | C | |
| CDA-706 | 86.50 Min. | 9.00- 11.00 |
0.50 | 1.00- 1.80 |
0.02 | 1.00 | 0.02 | 0.02 | 0.05 | |
| CDA-715 | 65.00 Min. | 29.00- 33.00 |
0.50 | 0.40- 1.00 |
0.02 | 1.00 | 0.02 | 0.02 | 0.05 | |
| all listed elements are maximum unless specified | ||||||||||